Generalization of the equivalent area method for the case of short fatigue cracks in a three-dimensional body

Nataliya Yadzhak

Анотація


In industry, structural elements with small cracks are widely used; however, little research has been done on relatively simple methods for lifetime evaluation of such structural elements. This study proposes a generalization of the equivalent area method for a case of small fatigue cracks using an alternative representation of the relation between the crack propagation rate and the crack tip opening. A tension problem for a three-dimensional body with an elliptical crack has been solved analytically by applying the generalized equivalent area method and numerically by the Runge-Kutta method. The comparison of the obtained solutions has shown a good correlation of the results that confirms the potential application of the generalized equivalent area method to short crack problems.

Повний текст:

PDF (English)

Посилання


O. E. Andreykiv and A. I. Darchyk, Fatigue fracture and lifetime of constructions, Naukova Dumka, Kyiv, 1992, 184p. (Russian).

M. Shata and Z. O.~Terletska, An energy approach in mechanics of fatigue macrocrack propagation, Fracture Mechanics of Materials and Structural Integrity, 2 (1999), 141-148 (Ukrainian).

O. Andreikiv and N. Sas, Subcritical growth of a plane crack in a three-dimensional body under the conditions of high-temperature creep, Materials Science 44 (2008), no. 2, 163-174.

V. V. Panasyuk, Mechanics of quasibrittle fracture of materials, Naukova Dumka, Kyiv, 1991, 416p. (Russian).

O. E. Andreykiv and N. B. Sas, Mathematical model for determination of the period of subcritical crack propagation under high temperature creep in solid bodies, Reports of the National Academy of Sciences of Ukraine 5 (2006), 47-52 (Ukrainian).

O. E. Andreikiv and N. B. Sas, Fracture mechanics of metallic plates under the conditions of high-temperature creep, Materials Science 42 (2006), no. 2, 210-219.

O. E. Andreykiv, V. R. Skalskyi, and I. Ya. Dolinska, Slow fracture of materials under local creep, Publishing center of the National Ivan Franko University of Lviv, Lviv, 2017, 399p. (Ukrainian).

O. Andreykiv, N. Shtayura, and R. Yarema, Energy-based approach to evaluation of short fatigue crack growth rate in plates, Strength of Materials 49 (2017), no. 6, 778-787.

V. V. Panasyuk, O. E. Andreykiv, and V. Z. Parton, Fracture mechanics and strengh of materials, vol. 1, Naukova Dumka, Kyiv, 1988, 488p. (Russian).

O. P. Datsyshyn, T. M. Lenkovskyi, and A. Y. Glazov, Specimen for the determination of fatigue thresholds under cyclic transverse shear, Materials Science 55 (2020), no. 4, 492-501.

O. E. Andreikiv, A. R. Lysyk, N. S. Shtayura, and A. V. Babii, Evaluation of the residual service life of thin-walled structural elements with short corrosion-fatigue cracks, Materials Science 53 (2018), no. 4, 514-521.

O. E. Andreikiv and N. S. Shtayura, Computational models of fatigue cracks growth in metallic materials under the action of force and physicochemical factors, Materials Science 54 (2019), no. 4, 465-476.




DOI: http://dx.doi.org/10.30970/vmm.2020.89.106-122

Посилання

  • Поки немає зовнішніх посилань.